2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] OpenScope MZ Reference Manual OpenScope MZ is an open source, multi-function, electronic instrumentation device that can be controlled using a computer or mobile device to acquire, analyze, visualize, and generate signals from circuits, sensors, and other electronic devices.
/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://reference.digilentinc.com/_media/reference/instrumentation/openscope-mz/openscope_mz_5.png) https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] https://reference.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] Features Connectivity WiFi (802.11g) USB 2.0 (High Speed Required) Oscilloscope 2 Channels 12-bit resolution per channel 6.25 MS/s () sample rate Flat bandwidth up to 1 MHz () at ±0.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/openscope_mz_hardware_block_diagram.png? id=reference%3Ainstrumentation%3Aopenscope-mz%3Areference-manual) (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/pinout_diagram.
2/10/2018 OpenScope MZ Reference Manual [Reference.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/analog_input_schematic.png? id=reference%3Ainstrumentation%3Aopenscope-mz%3Areference-manual) To ensure that the ADC () performs accurately, a 3 V reference with feedback must be assumed to be accurate with 0.1% resistors and 10% capacitors. (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/3v_ref_for_adc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] The OpenScope MZ has a single channel 10 MS/s () 10-bit function generator. An R2R resistor ladder with 1% resistors is used in place of a DAC (). Due to the nature of resistor ladders, it is possible to have a missing code for steps larger than 3 mV or encounter propagation delays, most notably when switching between the values of 0x1FF and 0x200.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/function_generator_feedback.png? id=reference%3Ainstrumentation%3Aopenscope-mz%3Areference-manual) The function generator supports: Sine, triangle, sawtooth, square and DC outputs 10-bit resolution 1 Hz () to 1 MHz () frequency 3 V pk2pk output with ±1.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/io_pins.png?id=reference%3Ainstrumentation%3Aopenscopemz%3Areference-manual) 10 Channels multiplexed between the Logic Analyzer and as general purpose IO 3.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/user_interface_communications.png? id=reference%3Ainstrumentation%3Aopenscope-mz%3Areference-manual) UART Interface OpenScope MZ uses an FTdI FT232RQ USB/Serial converter to handle the flow control between a host computer and a connected OpenScope MZ. The host computer will need a USB 2.0 High Speed (or better) port to allow the OpenScope MZ to run at 1.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] Any of the 10 LA signal channels in any combination Pattern matching of the LA signal channels is not supported DMA 8 out of 8 DMA channels available on the PIC32MZ are used on the OpenScope MZ.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] Subscribe to our Newsletter First Name Last Name Email Address Submit Our Partners Xilinx University Program Help Customer Info Technical Support Forum Videos Company Info About Us (https://youtube.com/user/digilentinc)(https://store.digilentinc.com/p (https://store.digilentinc.com/partners/xilinx(https://forum.digilentinc.com) FAQ pageid=26) university-program/) Reference Wiki (https://resource.digilentinc.
2/10/2018 OpenScope MZ Reference Manual [Reference.Digilentinc] (https://twitter.com/digilentinc) (https://www.facebook.com/Digilent) (https://www.youtube.com/user/DigilentInc) (https://instagram.com/digilentinc) (https://github.com/digilent) (https://www.reddit.com/r/digilent) (https://www.linkedin.com/company/1454013) (https://www.flickr.com/photos/127815101@N07) https://reference.digilentinc.