Data Sheet

10/3/2018 JTAG-SMT3-NC Reference Manual [Reference.Digilentinc]
https://reference.digilentinc.com/reference/programmers/jtag-smt3/reference-manual 9/16
The JTAG-SMT3-NC () is capable of targeting the following Xilinx devices:
Xilinx FPGAs
Xilinx Zynq-7000
Xilinx CoolRunner™/CoolRunner-II CPLDs
Xilinx Platform Flash ISP configuration PROMs¹ ²
Select third-party SPI PROMs¹ ²
Select third-party BPI PROMs¹ ²
The following devices cannot be targeted by the JTAG-SMT3-NC ():
Xilinx 9500/9500XL CPLDs
Xilinx 1700 and 18V00 ISP configuration PROMs
Xilinx FPGA eFUSE programming
Remote device configuration is not supported for the JTAG-SMT3-NC () when used with Xilinx’s iMPACT software.
¹ — Note: Please see the “Introduction to Indirect Programming – SPI or BPI Flash Memory” help topic in iMPACT for a list of supported FPGA/PROM
combinations.
² — Note: Please see the “Configuration Memory Support” section of Xilinx UG908 for a list of the FPGA/PROM combinations that Vivado supports.
Supported Target Devices
,
,
,
Programming Solutions Comparison Chart