Data Sheet

3/8/2018 Arty Z7 Reference Manual [Reference.Digilentinc]
https://reference.digilentinc.com/reference/programmable-logic/arty-z7/reference-manual 3/24
This reference manual not yet available for download.
ZYNQ Processor
650MHz dual-core Cortex-A9 processor
DDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controller: SPI, UART, CAN, I2C
Programmable from JTAG, Quad-SPI flash, and microSD card
Programmable logic equivalent to Artix-7 FPGA
Memory
512MB DDR3 with 16-bit bus @ 1050Mbps
16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifier
microSD slot
Power
Powered from USB or any 7V-15V external power source
USB and Ethernet
Gigabit Ethernet PHY
USB-JTAG Programming circuitry
USB-UART bridge
USB OTG PHY (supports host only)
Audio and Video
HDMI sink port (input)
HDMI source port (output)
PWM driven mono audio output with 3.5mm jack
Switches, Push-buttons, and LEDs
4 push-buttons
2 slide switches
4 LEDs
2 RGB LEDs
Download This Reference Manual
Features