Datasheet

ManualsBrandsDigilent ManualsData Communication and Human Input DevicesMCC E-1608 Multifunction Ethernet DAQ Device

Table Of Contents

Measurement Computing (508) 946-5100

info@mccdaq.com mccdaq.com

E-1608

Measurement Computing (508) 946-5100

info@mccdaq.com mccdaq.com

E-1608

16-Bit Multifunction Ethernet DAQ Device

Ethernet Interface

The E-1608 has a built-in 10/100 BASE-T

auto-negotiation, high-speed communi-

cation port. The networking protocols are

TCP/IP and UDP.

Once connected to the network, the device

can be remotely accessed and conﬁgured

through software from anywhere on the

network. Only one user at a time can

access the E-1608.

Software is required to actively communi-

cate with the E-1608 over Ethernet. The

device does not operate as a standalone

data logger.

Analog Input

The E-1608 provides 16-bit analog inputs

that are software-selectable as four DIFF

or eight SE inputs. The device supports

input ranges of ±10 V, ±5 V, ±2 V, and ±1 V

that are software-selectable per channel.

Analog Output

The E-1608 has two 16-bit, software-paced

analog outputs that can be updated at a

rate of 500 S/s. The output range is ﬁxed

at ±10 V.

Trigger Input

The E-1608 has an external digital trigger

input. The trigger mode is software-select-

able for edge- or level-sensitive mode.

Edge-sensitive mode can be conﬁgured for

either rising or falling edge. Level-sensitive

mode can be conﬁgured for either high

or low level. The default setting at power

up is edge-sensitive, rising edge.

Digital I/O

Eight bidirectional digital I/O bits are

individually-conﬁgurable for input or

output. The digital I/O terminals can

detect the state of any TTL-level input.

Bits can be conﬁgured for pull-up (+5 V) or

pull-down (0 V) with an onboard jumper.

Counter Input

One 32-bit event counter can count TTL

pulses. The counter accepts inputs of up

to 10 MHz.

Clock I/O

The E-1608 has one external clock input

and one clock output for analog inputs.

Calibration

The E-1608 is factory-calibrated using a

NIST-traceable calibration process. Speci-

ﬁcations are guaranteed for one year. For

calibration beyond one year, return the

device to the factory for recalibration.

E-1608-OEM Version

The E-1608-OEM has a board-only form

factor with header connectors for OEM

and embedded applications (no case or

network cable included). All devices can

be further customized to meet customer

needs.

The E-1608-OEM has the same speciﬁcations

as the standard device, but in a board-only

form factor with header connectors instead

of screw terminals.

The E-1608 offers high-speed analog input over an Ethernet inetrface, two analog outputs,

eight digital I/O, and one event counter input.

Overview

The E-1608 features a high-speed Ethernet interface that provides continuous

real-time data transfers. The device offers four differential or eight single-ended

analog inputs, and two analog outputs – all with 16-bit resolution. With eight

digital I/O and one counter input, the E-1608 is a low-cost, high-performance

multifunction I/O DAQ device.

Features

• High-speed Ethernet device

• Sample rates up to 250 kS/s

• 4 differential or 8 single-ended

16-bit analog inputs

• Two 16-bit analog outputs

• Eight digital I/O and one 32-bit

counter input

• Includes CAT-6 Ethernet cable

and 5 V power supply (required

to provide external power)

Supported Operating Systems

• Windows 10/8/7/Vista

32/64-bit

• Android

™

• Linux

Summary of content (6 pages)

PAGE 1
E-1608 16-Bit Multifunction Ethernet DAQ Device Features • High-speed Ethernet device • Sample rates up to 250 kS/s • 4 differential or 8 single-ended 16-bit analog inputs • Two 16-bit analog outputs • Eight digital I/O and one 32-bit counter input • Includes CAT-6 Ethernet cable and 5 V power supply (required to provide external power) Supported Operating Systems The E-1608 offers high-speed analog input over an Ethernet inetrface, two analog outputs, eight digital I/O, and one event counter input.
PAGE 2
E-1608 Software Software Support The E-1608 is supported by the software in the table below. Ready-to-Run Applications Data acquisition companion software with drag-and-drop interface that is used to acquire, view, and log data, and generate signals. DAQami can be configured to log analog, digital, and counter channels, and to view that data in real-time or post-acquisition on user-configurable displays. Logged data can be exported for use in Excel® or MATLAB®.
PAGE 3
E-1608 Specifications E-1608 Block Diagram EEPROM PHY PGA Mux A/D AI Amp 32-Bit Microcontroller with Ethernet Media Access Control Ref Dual D/A Amp 8 DIO Protection Bitwise Programmable DIO Power Supplies Specifications Analog Input A/D converter type: Successive approximation ADC resolution: 16 bits Number of channels : 4 differential, 8 single-ended (software-selectable) Input voltage range: ±10 V, ±5 V, ±2 V, ±1 V (software-selectable per channel) Absolute max input voltage (CHx relative
PAGE 4
E-1608 Specifications Analog Input DC Voltage Measurement Accuracy (All Values are (±)) 0.0076 Absolute Accuracy at Full Scale 4075 µV Gain Temperature Coefficient (% Reading/°C) 0.0014 Offset Temperature Coefficient 47 µV/°C 0.0076 2266 µV 0.0014 24 µV/°C 0.0076 968 µV 0.0014 10 µV/°C 0.0076 561 µV 0.0014 5 µV/°C Range Gain Error (% of Reading) Offset Error INL Error (% of Range) ±10 V 0.024 915 µV ±5 V 0.024 686 µV ±2 V 0.024 336 µV ±1 V 0.
PAGE 5
E-1608 Specifications External Clock Input/Output Network Factory Default Settings Factory default IP address: 192.168.0.101 Factory default subnet mask: 255.255.255.0 Factory default gateway: 192.168.0.1 Factory default DHCP setting: DHCP + link-local enabled Terminal names: AICKI, AICKO Terminal types AICKI: Input (receives A/D pacer clock from external source) AICKO: Output (outputs internal A/D pacer clock) Input clock rate: 250 kHz max Clock pulse width AICKI: 1 µs min AICKO: 1.
PAGE 6
E-1608 Ordering Order Information Software also Available from MCC Hardware DAQami Easy-to-use advanced data logging application to acquire, view, and log data Part No. Description TracerDAQ Pro E-1608 Ethernet-based DAQ device with eight analog inputs, 250 kS/s sample rate, two analog outputs, one 32-bit counter input, and eight DIO lines. Includes network cable, power adapter, and MCC DAQ software.