MCC USB-230 Series: USB-234 16-bit, 100 kS/s Multifunction DAQ Device - User Guide

USB-234 User's Guide Specifications
25
Memory
Table 8 Memory specifications
Parameter Specification
Data FIFO
2,047 samples (4096 bytes)
Non-volatile memory  Up to 256 kB microcontroller integrated Flash

2 kB microcontroller integrated EEPROM)
Power requirements
Table 9. Power specifications
Parameter Specification
From USB 4.50 to 5.25 VDC (Note 2)
Idle USB current
165 mA
Maximum load USB current <500 mA (Note 3)
Note 2: A typical bus-powered hub provides 100 mA on its USB lines. The USB-234 does not work on a bus-powered
hub.
Note 3: The maximum power draw from all output terminals should be kept under 0.9 W to avoid overloading the USB
port
Power output
Table 10. External voltage specifications
Parameter Specification
Output voltage
5 V, ±3%
Maximum current
150 mA
Overcurrent protection
200 mA
Short circuit current
50 mA
Overvoltage protection
±20 V
USB specifications
Table 11. USB specifications
Parameter Specification
Device type
USB 2.0 full speed (12 Mb/s)
Device compatibility
USB 1.1, USB 2.0
Connector type
USB micro-B receptacle
USB cable type A-micro-B cable, UL type AWM 2725 or equivalent (28 AWG × 2C + 28 AWG × 2C +
AB)
USB cable length
3 m (9.84 ft) max