MCC USB-200 Series Single Gain Multifunction USB DAQ Devices (USB-202) - Quick Start
Task
MCC
Device
Software
Acquire, Log and
View Data in Windows
without Programming
Most USB,
Bluetooth,
Ethernet
Install and run DAQami to configure the device and acquire data.
PCI/PCIe,
other USB
Install InstaCal and TracerDAQ (select the TracerDAQ checkbox during
installation).
Run InstaCal to configure the device, and then run TracerDAQ to acquire
data.
C, C++, C# NET, VB, or
VB .NET Programming
in Windows
USB,
Ethernet,
Bluetooth,
PCI/PCIe
Install InstaCal and the Universal Library (UL).
Run InstaCal to configure the device (recommended), or use the UL to
configure the device programmatically (advanced), and then use the UL to
acquire data programmatically.
Python Programming
in Windows
USB,
Ethernet,
Bluetooth
Install InstaCal and the Universal Library.
Install the Universal Library Python API for Windows from PyPI (https://
pypi.org/project/mcculw/). Refer to the Project Description for specific
requirements and installation instructions.
Run InstaCal to configure the device (recommended), or use the UL to
configure the device programmatically (advanced), and then use the UL to
acquire data programmatically.
C, C++, or Python
Programming in Linux
USB
Install the Universal Library API for Linux from GitHub (https://github.
com/mccdaq/uldaq). Refer to the README for specific requirements and
installation instructions.
Use UL for Linux to configure the device and acquire data programmatically.
LabVIEW Programming
in Windows
USB,
Ethernet,
Bluetooth,
PCI/PCIe
Install InstaCal and ULx for NI LabVIEW (an existing LabVIEW 2010 or later
installation is required.)
Run InstaCal to configure the device, and then use ULx for NI LabVIEW to
acquire data.
Visit our website at www.mccdaq.com for information about each MCC DAQ software package.
© Measurement Computing Corporation. All rights reserved.
Measurement Computing Corporation • 10 Commerce Way • Norton, MA 02766
508-946-5100 • info@mccdaq.com • www.mccdaq.com
What do you want to do?
MCC DAQ Software Provides Your Data Acquisition Solution
Go to www.mccdaq.com/swdownload for the latest version of each software package.
DAQami • Universal Library (UL)* • ULx for NI LabVIEW • TracerDAQ
Quick Start
MCC DAQ Software
* Universal Library is a programming library available on Windows, Linux, and Android platforms.
UL for Windows also includes the InstaCal installation and test utility.