MCC USB-200 Series Single Gain Multifunction USB DAQ Devices (USB-202) - Datasheet

Measurement Computing [phone]
5
[e-mail] mccdaq.com
USB-200 Series
April 2018. Rev 9
USB-200-Series-data © Measurement Computing Corporation
Counter
Pin name: CTR
Counter type: Event counter
Number of channels: 1
Input type: Schmitt trigger, 47 kΩ pull-down to ground
Input source: CTR screw terminal
Resolution: 32 bits
Maximum input frequency: 1 MHz
Counter read/write rates (software paced): 33 to 4,000 reads/writes per second
typ, system dependent
High pulse width: 25 ns min
Low pulse width: 25 ns min
Schmidt trigger hysteresis: 1.01 V typ, 0.6 V min, 1.5 V max
Input high voltage threshold: 2.43 V typ, 1.9 V min, 3.1 V max
Input high voltage limit: 5.5 V absolute max
Input low voltage threshold: 1.42 V typ, 1.0 V min, 2.0 V max
Input low voltage limit: –0.5 V absolute min, 0 V recommended min
Memory
Data FIFO: 12 K (12,288) analog input samples
Non-volatile memory: 2 KB (768 B calibration storage, 256 B UL user data,
1 KB system data)
Specifications and Ordering
Power
Supply current: 150 mA typ, 500 mA max (including user voltage, DIO and
AICKO loading)
Total quiescent current requirement for the device, which includes up to 10 mA
for the Status LED. This value does not include any potential loading of the
digital I/O bits, AICKO, or user voltage.
User voltage output terminal (+VO): 4.5 V min, 5.25 V max
User voltage output current: 100 mA max
Environment
Operating temperature:
All USB-200 Series devices except the USB-201-OEM: 0 °C to 55 °C
USB-201-OEM: –40 °C to 85 °C max
Storage temperature: –40 ˚C to 85 °C max
Relative humidity: 0% to 90% non-condensing
Mechanical
Signal I/O connector
Standard versions: Two banks of screw-terminal blocks
OEM versions: Two 2 × 8 0.1 in. pitch headers, labeled W1 and W3
Dimensions (L × W × H)
Standard versions: 117.86 × 82.80 × 28.96 mm (4.64 × 3.26 × 1.14 in.) max
OEM versions: 98.30 × 76.71 × 14.61 mm (3.87 × 3.02 × 0.575 in.) max
Order Information
Hardware
Part No. Description
USB-201 USB-based DAQ device with eight 12-bit analog inputs,
100 kS/s sampling, and 8 digital I/O lines; includes USB
cable and MCC DAQ software
USB-202 USB-based DAQ device with eight 12-bit analog inputs,
100 kS/s sampling, two 12-bit analog outputs, and 8 digital
I/O lines; includes USB cable and MCC DAQ software
USB-204 USB-based DAQ device with eight 12-bit analog inputs,
500 kS/s sampling, and 8 digital I/O lines; includes USB
cable and MCC DAQ software
USB-205 USB-based DAQ device with eight 12-bit analog inputs, 500
kS/s sampling, two 12-bit analog outputs, and 8 digital I/O
lines; includes USB cable and MCC DAQ software
USB-201-OEM Board-only USB-based DAQ device with eight 12-bit analog
inputs, 100 kS/s sampling, and 8 digital I/O lines
USB-202-OEM Board-only USB-based DAQ device with eight 12-bit analog
inputs, 100 kS/s sampling, two 12-bit analog outputs, and
8 digital I/O lines
USB-204-OEM Board-only USB-based DAQ device with eight 12-bit analog
inputs, 500 kS/s sampling, and 8 digital I/O lines
USB-205-OEM Board-only USB-based DAQ device with eight 12-bit analog
inputs, 500 kS/s sampling, two 12-bit analog outputs, and
8 digital I/O lines
Accessories
Part No. Description
ACC-205 DIN-rail kit; standard devices only
Software also Available from MCC
Part No. Description
DAQami Data acquisition companion software for acquiring data
and generating signals
TracerDAQ Pro Out-of-the-box virtual instrument suite with strip chart,
oscilloscope, function generator, and rate generator –
professional version
DASYLab Icon-based data acquisition, graphics, control, and analysis
software