MCC USB-200 Series Single Gain Multifunction USB DAQ Devices (USB-202) - Datasheet

Measurement Computing [phone]
2
[e-mail] mccdaq.com
USB-200 Series
Features
Digital I/O
USB-200 Series devices provide eight TTL-level digital I/O lines.
Each digital channel is software-selectable for input or output.
When configured for input, you can use the digital I/O terminals
to detect the state of any TTL-level input.
When configured for output, each digital channel can source/
sink up to ±24 mA.
Pull-Up/Pull-Down Configuration
Each USB-200 Series device has a user-configurable internal
jumper to configure the digital bits for pull-up or pull-down
(default).
Counter Input
Each USB-200 Series device supports one 32-bit TTL-level event
counter that accepts inputs up to 1 MHz.
Calibration
The USB-200 Series is factory-calibrated using a NIST-traceable
calibration process. Specifications are guaranteed for one year.
For calibration beyond one year, return the device to the factory
for recalibration.
USB-200 Series OEM Versions
OEM versions have board-only form factors with header con-
nectors for OEM and embedded applications. All devices can be
further customized to meet customer needs.
The OEM versions have the same specifications as the standard
devices, but come in a board‑only form factor with header connectors
instead of screw terminals.
Microcontroller
Connectors*
Reference
x8
x8
+5V
Digital I/O
USB
Power
Supplies
Analog Inputs
A/D
USB
Digital
Trigger
Counter
Pacer In
Pacer Out
12-bit
D/A
Registers
12-bit
D/A
Registers
Reference
Connectors*
USB-202 and USB-205 Standard and OEM Only
* Screw terminal connectors on USB-200 standard devices
Header connectors on USB-200-OEM devices