Instruction Manual

Xilinx University Program Virtex-II Pro Development Systemwww.xilinx.com 93
UG069 (v1.0) March 8, 2005 1-800-255-7778
R
11. The iMPACT software responds with a form that allows the user to specify which
design revisions are to be programmed and the programming options for the various
revisions. Select Design Revision Rev 0 and set the Write Protect (WP) bit to prevent
the user from overwriting the Golden configuration. Verify that the Operating Mode is
set to Slave and the I/O Configuration is set to Parallel Mode as shown in Figure C-8.
Figure C-7: Selecting the Program Command