Datasheet

The prototyping surface of the Blank Canvas is wired like two regular-sized breadboards with three power rails.
Breadboards can be attached to the surface if desired, but once attached, they cannot be removed.
The power rail rows are each labeled + or -, and are electrically connected as in a breadboard power rail. The breadboard
columns are numbered, and the five or six pins making up column are electrically connected. The breadboard rows are
labeled A through L.
The Analog Discovery Studio Blank Canvas features through-hole breakouts for a variety of common surface mount
component footprints.
One breakout of each footprint in the following list are included: SC89, SC70, SOT23, SOT89, SOT23-6, MSP8, DFN10,
SOIC8 SO8, TSSOP16, SOIC16, QFN32 TQFP32.
The Analog Discovery Studios fixed and variable power supply rails are exposed via through-holes.
The two variable power pins, labeled V+ and V-, are connected to the Analog Discovery Studio's programmable power
supplies. They can be programmed to voltage levels from 1 to 5V (V+) and -1 to -5V (V-) through the use of WaveForms'
Power Supplies instrument.
Four fixed supplies are available, +12V, -12V, 5.0V, and 3.3V.
A small labeled breadboard that can be soldered to the Blank Canvas's power supply pins, if desired, comes in the box
with the Blank Canvas.
Since each power supply is sourced directly from the Analog Discovery Studio, the minimum and maximum current and
power available for each supply depends on the Analog Discovery Studio's specifications. See the Analog Discovery
Studio Specifications for more information.
IC Breakouts
Power Supplies