Datasheet

You are here:: Digilent Documentation / Reference / Instrumentation / Analog Discovery Studio

/ Breadboard Canvas Reference Manual

The Breadboard Canvas is a replaceable and removable prototyping surface for the Analog Discovery Studio. The bulk of

the Breadboard Canvas consists of 2 regular sized breadboards and three power rails. At the top of the board, two small

breadboards contain the power access pins for the power supplies, and pin breakouts for the included I/O. Two switches,

LEDs, and buttons are integrated into the Breadboard Canvas for convenience. The power supply access pins can be

switched on and off via the power supply switches, and the status is indicated by the power indicator LEDs. The

Breadboard Canvas is included with the Analog Discovery Studio.

The Breadboard Canvas is designed to connect to the Analog Discovery Studio via standoffs. Magnets are located within

each of the holes that the standoffs slot into in order to hold the Canvas in place. The Breadboard Canvas can be removed

from the Analog Discovery Studio and swapped out with other canvases.

Warning! Do not swap out Canvases while the Analog Discovery Studio is turned on.

Breadboard Canvas Reference Manual

Mechanical Design

Digilent uses cookies to ensure you get the best experience on our websites. By using our site you agree to our use of cookies.

Got it!

Learn More

PAGE 1
Digilent uses cookies to ensure you get the best experience on our websites. By using our site you agree to our use of cookies. Learn More You are here:: Digilent Documentation / Reference / Instrumentation / Analog Discovery Studio / Breadboard Canvas Reference Manual Got it! Breadboard Canvas Reference Manual The Breadboard Canvas is a replaceable and removable prototyping surface for the Analog Discovery Studio.
PAGE 2
Breadboards The Analog Discovery Studio Breadboard Canvas has two regular-size breadboards and three power rails mounted to the canvas surface. Power Supplies Each of the Analog Discovery Studio's power supplies, both variable and fixed, are connected to the canvas, accessible via the power supplies breadboard. The power access pins for the variable supplies, labeled V+ and V-, are connected to the Analog Discovery Studio's programmable power supplies.
PAGE 3
User LEDs Three light emitting diodes, each of a different color, red, green, and yellow, are available on the Breadboard Canvas. These LEDs can be controlled by providing power to the corresponding pin on the Built-in I/O Breadboard. A circuit diagram detailing how the LEDs are connected to the Built-in I/O Breadboard can be seen below.