Datasheet

The Analog Discovery Studio can be used with WaveForms' Static I/O instrument to emulate a variety of user
input/output devices on the digital input/output pins. Virtual LEDs, buttons, switches, sliders, and displays can be
assigned to specific digital I/O pins, and interacted with within the WaveForms user interface.
The Analog Discovery Studio's digital input/output channels use a 3.3V logic standard for output, and can accept either
1.8V or 3.3V logic signals as inputs. The digital input/output pins are tolerant to input signals up to 5V.
Important Note: To prevent damage to the device, care must be taken not to drive input signals to the digital input/output
channels over 5V.
Digital input/output channels used by the Static I/O instrument can still be used by other instruments using the same
digital input/output channels, however, other instruments can only use these shared channels as inputs.
For more information on the digital input/output channels, please visit the Analog Discovery Studio Specifications. For a
walkthrough of the different features of WaveForms' Static I/O instrument, please visit the Using the Digital I/O guide.
Spectrum Analyzer