Datasheet

The Analog Discovery Studio has a variety of different power supply rails that are can be used to power circuits under
test. The V+ and V- rails are variable, while the rest are fixed. The fixed rails are summarized in the table below:
Label Voltage Maximum Current
+12V 12V +/-5% 0.2A
-12V -12V +/-5% 0.2A
5.0V 5V +/-5% 1.0A
3.3V 3.3V +/-5% 1.0A
Note: The 3.3V and 5.0V power supply rails are only available from pins located on the Canvas.
The Analog Discovery Studio also features two variable power supply rails, labeled V+ and V-, which can be set to
voltage levels between 1 to 5V and -1 to -5V respectively, through the use of WaveForms' “Supplies” instrument. Each of
these supplies can provide at most 2.1 W or 700 mA.
For more information on using the programmable power supplies, please visit the Analog Discovery Studio
Specifications. For a walkthrough of the different features of WaveForms' Power Supplies instrument, please visit the
Using the Power Supplies guide.
Voltmeter