Datasheet

The Analog Discovery Studio can be used with WaveForms' Waveform Generator instrument to output analog voltage
waves via either BNC cables or MTE cables. The Waveform Generator converts 14-bit digital samples to analog at a rate of
up to 100 MS/s on each of two channels. When the Waveform Generator instrument is used, the Analog Discovery
Studio's analog output channels act as an Arbitrary Waveform Generator. The instrument supports everything from
simple waveforms like Sine and Triangle waves, up to more complicated functions like AM and FM modulation. Custom
sets of samples can be defined by the user in applications like Excel and imported to WaveForms.
Each waveform generator channel is considered a single ended pin, however, a connected circuit must share a ground
with the Analog Discovery Studio. Each channel has a bandwidth of 8MHz through both the BNC and MTE connectors.
AC amplitudes of +-5V and DC offsets of +-5V are supported.
Since the Analog Discovery Studio's analog output channels are shared, the Waveform Generator instrument cannot be
used at the same time as the Network Analyzer, or Impedance Analyzer instruments.
For more information on the analog output (“Wavegen”) channels, please visit the Analog Discovery Studio
Specifications. For a walkthrough of the different features of WaveForms' Waveform Generator instrument, please visit
the Using the Waveform Generator guide.
Power Supplies