Datasheet

The Analog Discovery Studio can be used with WaveForms' “Impedance” instrument to view a wide variety of frequency
response characteristics of a circuit under test. Input, Phase, Voltage, Current, Impedance, Admittance, Inductance, Factor,
and Nyquist plots are all available. In addition, Custom plots can be used to present the results of a wide variety of
different mathematical operations on buffered data.
Frequency sweeps can be performed with in ranges between 100 uHz and 25 MHz, with as many as 10k samples per
decade. The signal used to perform the sweep can be selected from a variety of preset, with configurable amplitude and
offset. An external network analyzer reference circuit can be selected from a variety of options.
The Impedance Analyzer instrument uses the analog output channels and analog input channels of the Analog
Discovery Studio to probe a test circuit.
Since the Analog Discovery Studio's analog input and output channels are shared, the Impedance Analyzer instrument
cannot be used at the same time as the Oscilloscope, Waveform Generator, Voltmeter, Data Logger, Spectrum Analyzer, or
Network Analyzer instruments.
For more information on the analog output and analog input channels, please visit the Analog Discovery Studio
Specifications. For a walkthrough of the different features of WaveForms' Impedance Analyzer instrument, please visit
the Using the Impedance Analyzer guide.
Protocol Analyzer