Datasheet

The Analog Discovery Studio can be used with WaveForms' “Network” instrument to view the amplitude and phase
response of a circuit under test. Nichols and Nyquist plots can also be viewed with this instrument.
Frequency sweeps can be performed in ranges between 1 mHz and 10 MHz with up to 10k samples per decade. The wave
used for the sweep can be customized, and uses the same resources as the Waveform Generator instrument.
The Network Analyzer instrument uses the analog output and analog input channels of the Analog Discovery Studio to
probe a test circuit. The Network Analyzer can be configured to use an external signal to provide input to the circuit
under test, rather than using the analog output channels.
Since the Analog Discovery Studio's analog input and output channels are shared, the Network Analyzer instrument
cannot be used at the same time as the Oscilloscope, Waveform Generator, Voltmeter, Data Logger, Spectrum Analyzer, or
Impedance Analyzer instruments.
For more information on the analog output and analog input channels, please visit the Analog Discovery Studio
Specifications. For a walkthrough of the different features of WaveForms' Network Analyzer instrument, please visit the
Using the Network Analyzer guide.
Impedance Analyzer