User manual

Basys MX3™ Board Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 15 of 56
Figure 4.1. Switches schematic diagram.
4.1 Connectivity
Label
Schematic
Name
PIC32 Pin
Pin
Shared
With
Description
SW0
SW0
RPF3/RF3
Switch 0
SW1
SW1
RPF5/PMA8/RF5
Switch 1
SW2
SW2
RPF4/PMA9/RF4
Switch 2
SW3
SW3
RPD15/RD15
Switch 3
SW4
SW4
RPD14/RD14
Switch 4
SW5
SW5
AN11/PMA12/RB11
Switch 5
SW6
SW6
CVREFOUT/AN10/RPB10/CTED11PMA13/RB10
Switch 6
SW7
SW7
AN9/RPB9/CTED4/RB9
TRIG_2
Switch 7
Table 4.1. Switches connectivity.
All the pins must be defined as digital input: their corresponding TRIS bit must be set to 1, and analog function
must be disabled for pins routed to SW5, SW6, and SW7.
TRISFbits.TRISF3 = 1; // RF3 (SW0) configured as input
TRISFbits.TRISF5 = 1; // RF5 (SW1) configured as input
TRISFbits.TRISF4 = 1; // RF4 (SW2) configured as input
TRISDbits.TRISD15 = 1; // RD15 (SW3) configured as input
TRISDbits.TRISD14 = 1; // RD14 (SW4) configured as input
TRISBbits.TRISB11 = 1; // RB11 (SW5) configured as input
ANSELBbits.ANSB11 = 0; // RB11 (SW5) disabled analog
TRISBbits.TRISB10 = 1; // RB10 (SW6) configured as input
ANSELBbits.ANSB10 = 0; // RB10 (SW6) disabled analog