Owner manual

PmodXYZ Reference Manual
www.digilentinc.com page 2 of 2
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Connector J1
–
SPI Communications
Pin
Signal
Description
1 SS Slave Select
2 MOSI Master out/Slave in
Data
3 MISO Master in/Slave out
Data
4 SCK Serial Clock
5 GND Power Supply Ground
6 VCC Power Supply (3.3V)
7 INT/SPISEL SPI Enable/Interrupt
Signal
8 NC Not Connected
9 NC Not Connected
10 NC Not Connected
11 GND Power Supply Ground
12 VCC Power Supply (3.3V)
Connector J2
–
Ethernet Interface
Interface Connector Signal Description