User Manual

32 www.xilinx.com Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
Chapter 4: FPGA Configuration Options
R
Click Configuration Options as shown in Figure 4-11. Using the Configuration
Rate drop list, choose 25 to increase the internal CCLK oscillator to approximately
25 MHz, the fastest frequency when using an XCF04S Platform Flash PROM. Click OK
when finished.
Figure 4-10: Set Properties for Bitstream Generator
Figure 4-11: Set CCLK Configuration Rate under Configuration Options
UG230_c4_11_022706
UG230_c4_12_022706