Datasheet

PmodCON4™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 2 of 2
Header J1
Jumper Headers
Pin Number
Description
Jumper Settings
Description
1
Input P1
J2
The J2 RCA jack will receive this input
2
Input P2
J3
The J3 RCA jack will receive this input
3
Input P3
4
Input P4
5
Ground
6
Not Connected
Table 1. Pin Descriptions as labeled on the Pmod.
Figure 1. PmodCON4 circuit diagram.
Since RCA jacks typically send or receive analog voltage signals, users can easily connect thePmodCON4 to either
an ADC or DAC module such as the PmodAD5 or the PmodDA4.
3 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 1.10 inches long on the sides parallel to the pins on
the pin header and 0.8 inches long on the sides perpendicular to the pin header.
J1 Connector
J2
J3
J2
JP1
J2
J3
J3
J2
J3
J2
J3
RCA Audio
Jacks
JP2
JP3
JP4
GND
NC