Datasheet

PmodLED™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 2 of 2
It is recommended that Pmod is operated at 3.3V.
3 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 0.8 inches long on the sides parallel to the pins on
the pin header and 0.8 inches long on the sides perpendicular to the pin header.
Pin
Signal
Description
1
LD0
LED 0
2
LD1
LED 1
3
LD2
LED 2
4
LD3
LED 3
5
GND
Power Supply Ground
6
VCC
Positive Power Supply
GND
Vcc
J1 Connector
P1
P2
P3
P4
Figure 1. LED module circuit diagram.
Table 1. Pinout description table.