Datasheet

PmodAD1™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 2 of 2
A pinout table and diagram for the PmodAD1 are provided below:
Any external power applied to the PmodAD1 must be within 2.35 to 5.25 volts to ensure that all of the
components in the PmodAD1 work correctly.
2 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 0.95 inches long on the sides parallel to the pins on
the pin header and 0.80 inches long on the sides perpendicular to the pin header.
Header J1
Pin
Signal
Description
1
CS
Chip Select
2
D0
Input Data 1
3
D1
Input Data 2
4
SCK
Serial Clock
5
GND
Power Supply Ground
6
VCC
Power Supply (3.3V/5V)
Header J2
Pin
Signal
Description
1
A0
Input Data 1
2
GND
Power Supply Ground
3
A1
Input Data 2
4
GND
Power Supply Ground
5
GND
Power Supply Ground
6
VCC
Positive Power Supply
Table 1. Pin descriptions as labeled on the PmodAD1.
Figure 1. AD1 circuit diagram.