Datasheet

PmodOC1™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 2 of 2
Pin
Signal
Description
1
P1
Output 1
2
P2
Output 2
3
P3
Output 3
4
P4
Output 4
5
GND
Power Supply Ground
6
VCC
Positive Power Supply
Table 1. Pinout description table.
Any external power applied to the PmodOC1 must be within 2.7V and 5.25V; however, it is recommended that
Pmod is operated at 3.3V.
3 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 1 inch long on the sides parallel to the pins on the
pin header and 0.8 inches long on the sides perpendicular to the pin header.