Datasheet

The Analog Discovery Studio MTE (Measurement and Test Equipment)

cables are the same MTE cables that ship with the Analog Discovery Studio.

This set of six cables features male-terminated flywires are perfect for

connecting signals to circuits on the Breadboard Canvas.

The Power Supply MTE cable is a keyed 2x3 cable that provides access to

the ±12V (red, white), variable supplies (red, white), and ground (Black). The

channel one oscilloscope MTE cable is used for making differential

measurements and is a 2x1 cable with a connection for the positive (orange)

and negative (orange/white) oscilloscope channels. The channel two

oscilloscope MTE cable is used for making differential measurements and is a

2x1 cable with a connection for the positive (blue) and negative (blue/white)

oscilloscope channels. The channel one waveform generator MTE cable is a

2x1 cable and provides access to channel one of the waveform generator and

ground. The channel two waveform generator MTE cable is a 2x1 cable and

provides access to channel two of the waveform generator and ground. The

Digital MTE connector is a 2x10 cable and provides access to the two triggers

(grey and grey/white), two grounds (black), and 16 Digital I/O (pink, green,

purple, brown, pink/white, green/white, purple/white, brown/white... repeated).

PAGE 1
The Analog Discovery Studio MTE (Measurement and Test Equipment) cables are the same MTE cables that ship with the Analog Discovery Studio. This set of six cables features male-terminated flywires are perfect for connecting signals to circuits on the Breadboard Canvas. The Power Supply MTE cable is a keyed 2x3 cable that provides access to the ±12V (red, white), variable supplies (red, white), and ground (Black).
PAGE 2
Note: The oscilloscope and waveform generator can also be accessed via BNC connectors for single-ended measurements.