Operating instructions

2 - 21
MAN0443.P65 Issue 13 Aug 04 5701 Control System
05701-M-5001 A02279
CHAPTER 2 - SYSTEM DESCRIPTION
RL1-NC (Fault) 1
RL1-COM (Fault) 3
RL2 NC 5
RL3 NC 7
RL3 COM 9
RL4 NC 11
RL5 NC 13
RL5 COM 15
RL6 NC 17
RL7 NC 19
RL7 COM 21
RL8 NC 23
Ground 25
Sensor S Connection 27
Sensor NS Connection 29
Analogue O/P (+) 31
Remote Inhibit In 33
+24V (Out/In) 35
NC = Normally Closed. NO = Normally Open. COM = Common.
Relay contact conditions refer to the no power state of the relay.
2 RL1 NO (Fault)
4 RL2 COM
6 RL2 NO
8 RL3 NO
10 RL4 COM
12 RL4 NO
14 RL5 NO
16 RL6 COM
18 RL6 NO
20 RL7 NO
22 RL8 COM
24 RL8 NO
26 Ground
28 Sensor 01 Connection
30 Not Connected
32 Analogue O/P (-)
34 Remote Reset In
36 0V (Out/In)
Slot
Location
User
Terminal
Reference
5.6.2 Rear Access Connections
IMPORTANT
Refer to configuration printout, or use the Relays Screen of the
Engineering Interface Software, to determine the relay function.