Operating instructions

2 - 10
MAN0443.P65 Issue 13 Aug 04 5701 Control System
05701-M-5001 A02279
CHAPTER 2 - SYSTEM DESCRIPTION
4.5 Single Channel Control Card Physical Layout
The physical layout of the Single Channel Control Card is shown below.
The Sensor Drive Modules plug into the 14-way connectors J1 and J2
while the Analogue Output Module, when fitted, plugs into J3 and J4. Link
LK1, available on MkII cards only, is used when individually powering
control cards See Chapter 4, Section 16.2.
8-Way Analogue
Output Module
Connectors
14-Way
Connectors
To Sensor
Drive Modules
Liquid Crystal
Display
LEDs
Reset/Select
Push Button
Switch
32-Way Socket (SK2)
To Backplane
15-Way D Type Socket
(SK1) To Interface or
Relay Cards
1 2 3
Link LK1
(MkII Cards
Only)
Fuse
FS1