Operating instructions

5 - 18
MAN0443.P65 Issue 13 Aug 04 5701 Control System
05701-M-5001 A02279
CHAPTER 5 - COMMISSIONING AND
MAINTENANCE INSTRUCTIONS
All Active No No
All Active No No
1Vx - - -
--
2Vx Active Yes No
All Active No No
All Active No No
Error Error Code Meaning S/W Card Fault Latch
Code Status Signal
64 Timeout Error
Backplane command timed out.
Reset card by removing power to the
card. If problem persists, replace the
card.
63 Slot Inactive Error
Backplane command sent to empty slot.
Reset card by removing power to the
card. If problem persists, replace the
card.
62 Not applicable.
Communications Error
A participant in a complex alarm function
hosted by this card has stopped
communicating.
Check all cards within the participant
group are fully inserted into the rack and
are functioning correctly.
5.6 Miscellaneous Errors
07 Divide By Zero.
Internal calculation error.
Reset card by removing power to the
card. If problem persists, replace the
card.
01 Invalid Command
A serial command has been received
that is not valid for this card.
Error Error Code Meaning S/W Card Fault Latch
Code Status Signal