Troubleshooting guide

17
7. Physical Connection
The basic connections are illustrated in the image below:
Switch
A 1GB switch is required due to the amount of information flowing between the I/O and the
servers. Insufficient link speed of various components will result in missing or N/A listings within
the Inventory window. You can determine the link speed by looking at the indicators on the
switch itself. There are indications on the Ethernet ports as well.
Switch
Led State per Port
Activity
ProSafe 8-Port Gigabit Ethernet
Switch GS108v3
Left LED – 100 Mbps link
Right LED – 10 Mbps link
Both LEDs – 1000 Mbps link
Blinking
HP 1410-16G (J9560A) 16-Port
Rack Mountable Switch
Link/Act – 10 or 100 Mbps
Speed ON – 1000 Mbps
Blinking
Preferences Window
The Preferences window includes three tabs:
1. General (Local LAN Port): Lists all available network adapters. Choose the network
adapter that is connected to the SoundGrid network. Network adapters are displayed by MAC