Specifications

63
DIGIGRID DLS/DLI
7.1 Device-to-Device Patching
Use this view to patch devices and drivers to each other. All device and driver channels are shown along the horizontal and vertical
axes. Each axis carries the same channels. There are many ways to patch devices, but normally DLI/DLS inputs 1–16 will be patched
to the ASIO/Core Audio inputs 1–16 for recording. For playback the patches are opposite, unless you choose to patch to the eMotion
ST mixer for monitor mixing.
7.2 eMotion ST Mixer Patching
The eMotion ST mixer enables you to create studio monitor mixes as well a personalized headphone mixes. Patch to and from the
eMotion ST mixer using the eMotion ST input and output tabs on the left side of the interface. The green buttons indicate whether
a channel is mono, left side of a stereo pair, or right side of a stereo pair. Toggle between these states by double-clicking on the
button.
The eMotion ST mixer enables you to create personalized monitor mixes, with plugin processing done pre-, post-, or in parallel with
Pro Tools. eMotion ST combines 8 channel inputs with up to 64 StudioRack plugins. Each input or StudioRack channel can be sent to
aux tracks or a main mix. eMotion ST requires a DSP server.