Specifications

60
DIGIGRID DLS/DLI
Status
Indicates the sync status of a DLI/DLS device.
Current Clock Source
Indicates the clock source of the DLI/DLS. The actual clock source is shown; if it diers from the requested
clock source, the display will be red. Possibilities: Internal, Digital Stream, Sync over Ethernet.
SoE
Indicates if the DLI/DLS is locked to the SoundGrid network, and if it is the SoE master or slave. This message
is mirrored in the device rack slots in the System Inventory page.
6.2 SoundGrid Studio Sample Rate Control
In SGP mode, DLI/DLS connects to the SoundGrid driver in order to communicate with a DAW, local or remote. SoundGrid Studio
controls the sample rate of the network and the SoundGrid driver. The SoundGrid Studio system sample rate is displayed in the
Sample Rate section of the Setup page. The sample rate indicated in this window mirrors that shown in the Clock page of the control
panel.
Next to the Sample Rate window is the Sample Rate Master/Slave control, which
determines SoundGrid Studio’s role in changing the sample rate.