Specifications

59
DIGIGRID DLS/DLI
Clock Operation Mode
Tells the system the mode in which the BNC connectors work—Loop Sync or Word Clock. Loop Sync is
the preferred clock mode when using DigiLink-compatible I/O devices. However, some devices cannot
accept Loop Sync, in which case you must select Word Clock.
Loop Master Display
Indicates the Loop Master of all DigiLink-compatible I/O devices in this loop (e.g., DLI/DLS, 192, other DigiLink-compatible I/O).
Sample Rate
Indicates or selects clock sample rate for the DLI/DLS. This information is also displayed in the device slot
in SoundGrid Studio.
■
Sample Rate can always be changed when DLI/DLS Clock Source is set to Internal or is locked to the internal clock of the connected
Digilink compatible I/O device.
■
If DLI/DLS is set to external clock this control is inactive and grayed out.
■
If DLI/DLS is an SoE slave, then this control is inactive and grayed out.
■
When DLI/DLS is set to external clock, that cannot provide the Sample Rate set by the Sample Rate Master Application ,
the DLI/DLS will switch to Internal.