Specifications
55
DIGIGRID DLS/DLI
The DL1 and DL2 control pages are the rightmost tabs. Each
tab controls the device patching and other device-specic
parameters of the respective DL port.
Inputs and outputs for the selected device can be routed to physical
I/Os that correspond to device patches in SoundGrid Studio.
■
One or two peripheral devices can be connected to each port.
They are identied on the left sidebar. Click on a peripheral’s
name to see its physical connections.
■
The Main control tab is used to dene physical inputs and outputs.
- Each channel has a drop-down menu from which
connections are selected.
- One channel output can be assigned to several physical
outputs. To assign a channel to multiple outputs, select an
output from the menu. Then hold CTRL while selecting other
outputs. The additional devices will appear orange in the
drop-down list, and a plus (+) symbol will appear on the
main output.
- A physical input can be assigned to several channels.
- An Identify button in the lower left corner triggers front panel
lights on the specic Digilink-enabled device. This is
not the same as the Identify button on the banner, which
identies the DLI/DLS.
■
Adjust reference levels, choose input trims, and ac tivate soft
clip. Analog ins and outs can be adjusted from two tabs
when applicable.
■
Digital in/out can be adjusted when applicable.