Specifications

49
DIGIGRID DLS/DLI
Once it has scanned the system, the Wizard will oer to congure the SoundGrid
network. Choose “Next” to start automatic conguration. This will take a few
moments. Choose “Cancel” to congure manually. A drop-down menu provides a list
of conguration templates. Choose the template that best describes your hardware
devices and production needs. You can also save and load your own templates
If the Wizard cannot locate the requested SoundGrid network devices, this means you
may have chosen an incorrect network port on your computer. Check the physical
connections and then click SCAN. When conguration is complete, close the window.
If there is still a problem, you can congure your system manually. Use the System
Inventory page to assign devices, control the network, and manage clock. For detailed
information about SoundGrid Studio, please refer to the SoundGrid Studio user guide.
5.1 Setting Up the Driver
You can allocate between 32 and 128 driver channels. Allocate driver channels in
Rack B of the Setup Page. The number of channels is reected in the patch tabs: fewer
allocated channels means fewer channels in the Patch page. The default is 32.
5.2 Setting the DAW Playback Engine for SGP Mode
SoundGrid Studio uses the SoundGrid ASIO/Core Audio driver to communicate with all network devices and with a DAW, whether
local or remote. Set the playback engine to “Waves SoundGrid.” Patch DAW inputs and outputs to the driver.