Specifications

45
DIGIGRID DLS/DLI
Connect the host computer to the DLS Ethernet port. Connect DLI/DLS DL Port 1 to the DigiLink compatible I/O device’s primary
port. In these examples, DLI/DLS is the SoundGrid network (SoE) clock master. Clock is delivered from the DigiLink compatible device
through the DigiLink connection to the DLI/DLS, and from there to the entire SoundGrid network. If the DLI/DLS internal clock or SOE
sources are used, a clock connection between DLI/DLS and the DigiLink compatible device is required. This is illustrated by the optional
clock connection in the diagram.
Primary Port Expansion Port
In Out
DigiLink Interface
DL1 DL2
WC / Loopsync*
DiGiGrid DLI
Ethernet
DigiLink
Clock (optional)
Analog
* Dependent on Clock
Mode setting in the DLS/
DLI control panel