Specifications

34
DIGIGRID DLS/DLI
Since the DLS is no longer generating SoE but is slaved to it,
you must set Clock Source to SoE in order to receive it from the
SoundGrid network. Open the Pro Tools Hardware Setup window
and select any AES/EBU channel as the Clock Source. The DLS will
use this port to lock to SoundGrid Studio via SoE.
SoundGrid Studio Sample Rate Control
On the top bar of each page in SoundGrid Studio is a window that indicates the
system sample rate. In SGP mode, this window is used to set sample rate under
certain conditions. In I/O mode, sample rate is set by Pro Tools, and this window
is for sample rate display only.