Specifications

29
DIGIGRID DLS/DLI
In I/O mode, Pro Tools controls clock settings. However, there
are a few controls and indicators that you should be aware of
when integrating a Pro Tools HD/HDX or HD Native system with a
SoundGrid network.
Source
Sets or displays the preferred clock source for the DLI/DLS. Available sources are Internal, Word
Clock/Loop Sync and SoE. In I/O Mode the DLI/DLS clock sources are controlled from the Pro
Tools Hardware Setup page. Use the Pro Tools Clock Source menu to set the clock source of the
DLI /DLS represented as a192 Digital in Pro Tools.
Clock Operation Mode
Tells the system which clock source to anticipate on the BNC connectors: Loop Sync or Word
Clock. Loop Sync is the preferred clock mode when using DigiLink-compatible I/O devices.
However, certain devices cannot accept Loop Sync. For those devices, select Word Clock.