Specifications
23
DIGIGRID DLS/DLI
3.1 Firmware Status and Updates
Next to each device slot is a button labeled FW. Use this button to check the status of, and if necessary update, the rmware in the
DLI/DLS. Each time you update the SoundGrid Studio Application, the most current DLI/DLS rmware is included with the updated
installer. When you next launch SoundGrid Studio, you will learn if all devices are running the most current rmware.
An I/O that is using outdated or incompatible rmware cannot join a SoundGrid network until its rmware is updated. SoundGrid
Studio assesses the device’s rmware when scanning with the Wizard or when you assign it.
FW Indicates the status of the device’s rmware. The user is given the choice to update it. Status indications are color coded:
Grey Compatible rmware
Blue Compatible rmware, but a newer version exists
Red Firmware not compatible and must be updated in order to use
Click on the FW button to launch the Updater. This will initiate a scan of the hardware and then oer
options. Do not disconnect the device or turn o the computer until you see “Done.”
After updating your device must be restarted. Devices will restart automatically, and some will prompt
‘Please Restart’.
The ID button activates LEDs on the front panel of the hardware device. The same button can be found on the DLI/DLS Control
Panel.