Specifications

21
DIGIGRID DLS/DLI
The rst time you launch SoundGrid Studio, the Wizard will open. The Wizard scans the network, inventories its assets, and then
congures the devices. If the Wizard does not start automatically, click the SCAN button, which is next to the Network Port window.
Once it has scanned the system, the Wizard will oer to congure the SoundGrid
network. Choose “Next” to start automatic conguration. This will take a few moments.
Choose “Cancel” to congure manually. A drop-down menu provides a list of
conguration templates. Choose a template that best describes your hardware devices
and production needs. You can save and load your own templates
If the Wizard cannot locate the requested SoundGrid network devices, this means you
may have chosen an incorrect network port on your computer. Check the physical
connections and then click SCAN. When conguration is complete, close the window.
If there is still a problem, you can congure your system manually. Use the System
Inventory page to assign devices, control the network, and manage clock. To learn how
to use this page, please refer to the SoundGrid Studio Application user guide.
SoundGrid Studio uses Ethernet to stream audio between devices on a SoundGrid network. Synchronization clock is also carried
over Ethernet. This method of providing clock is called Sync over Ethernet (SoE). SoundGrid I/O devices can clock by other means as
well, but SoE is by far the most common (and convenient) way to provide clock information to network devices.
In the SoundGrid Studio Setup page, you will see all devices assigned to your system, each displays the mode, clock status, and
sample rate of the I/O. Here the DLS is the SoundGrid network’s clock master device, indicated by its blue color and the icon text: On,
Master Clock, INT (48 kHz).
Scan