Specifications
19
DIGIGRID DLS/DLI
Adding a Server to a DiGiGrid DLI
Each of the above conguration diagrams have included a DLS interface, which has a built-in DSP server. When you work with a DLI
interface, which does not have a built-in server, you may choose to expand your SoundGrid network by adding an external server.
To add a server to a SoundGrid network, just plug in an Ethernet cable and assign the SoundGrid Studio Device Racks. When you
add a server to the SoundGrid network, the device will appear in the Server Rack but will not yet be allocated. Use the rack menu to
assign the server to your computer, as described above. You can also run the SoundGrid Wizard for automatic conguration.
Server
DL1Ethernet
Primary Port Expansion Port
In Out
DL2
DigiLink Interface
WC / Loopsync*
1 2
DiGiGrid DLI
Ethernet
DigiLink
Clock
Analog
* Dependent on Clock
Mode setting in the
DLS/DLI control panel