Specifications
17
DIGIGRID DLS/DLI
2.2 Connections for Pro Tools HD Native in I/O mode
Integrating a Pro Tools HD Native system with a SoundGrid network involves essentially the same steps. In this example, An Avid
Omni interface is used as a hardware I/O.
■
Computer’s Thunderbolt port connects to HD Native interface port.
■
DigiLink Port 1 connects to Omni Primary port.
■
Omni expansion port connects to DLI/DLS Port 1. This provides 16 channels.
■
Pro Tools HD Port 2 connects to DLI/DLS DL Port 2. This provides another 32 channels.
■
Loop Sync goes back and forth between Omni and DLI/DLS.
This conguration yields 48 channels and uses the DLS’s buit-in DSP server.
DL1
1 2
Ethernet DL2
Primary Port
In
Expansion Port
Out
DigiLink Interface
WC / Loopsync*
DiGiGrid DLS
Ethernet
DigiLink
Clock
Analog
Thunderbolt