Specifications
16
DIGIGRID DLS/DLI
This setup includes four DigiLink-compatible I/O devices, two Pro Tools processing cards, and a DLI/DLS. It provides 64 channels that
can be used for SoundGrid processing or I/O.
Pro Tools card #1:
■
Pro Tools HD Card 1 Port 1 connects with DigiLink-compatible I/O #1 primary port. I/O #1 Expansion Port connects with I/O #2
primary port.
■
Pro Tools HD Card 1 Port 2 connects with I/O #3 primary port. I/O #3 Expansion Port connects with I/O #4 primary port.
Pro Tools card #2:
■
Pro Tools HD Card 2 Port 1 connects with DLS Port 1. This provides 32 channels.
■
Pro Tools HD Card 2 Port 2 connects with DLS Port 2. This provides another 32 channels.
■
Loop Sync through all devices
■
Ethernet connection between DLS and SoundGrid network
In this conguration, we really just have two sets of
two DigiLink-compatible I/O devices, both connected
to Pro Tools HD Card 1 - Ports 1 and 2.
Pro Tools HD Card 2 connects to the DLS only.
DigiLink Interface
Primary Port Expansion Port
Primary Port Expansion Port
In Out
DigiLink Interface
Primary Port Expansion Port
In Out
DigiLink Interface
Primary Port Expansion Port
In Out
DigiLink Interface
WC / Loopsync*
In Out
DL1 DL2
WC / Loopsync*
WC / Loopsync*
WC / Loopsync*
1 2
1 2
DiGiGrid DLS
Ethernet
DigiLink
Clock
* Dependent on Clock
Mode setting in the DLS/
DLI control panel