Specifications
15
DIGIGRID DLS/DLI
In the next example, two DigiLink ports are used. This conguration provides 48 channels.
■
HDX Core card Port 1 connects to primary port of DigiLink-compatible I/O.
■
DigiLink-compatible I/O expansion port connects to DLI/DLS Port 1. This provides 16 channels.
■
HDX Core card Port 2 connects to DLI/DLS Port 2. This provides another 32 channels.
■
Connect DLI/DLS with the host computer via Ethernet.
■
Connect DigiLink-compatible I/O Loop Sync Out to DLI/DLS Loop Sync In. DLI/DLS Loop Sync Out to DigiLink-compatible I/O
Loop Sync In. Pay attention to the direction of the loop.
DiGiGrid DLS
DL1
12
Ethernet
Primary Port
WC / Loopsync*
Expansion Port
In Out
DL2
DigiLink Interface
Ethernet
DigiLink
Clock
Analog
* Dependent on Clock Mode setting
in the DLS/DLI control panel