Specifications
12
DIGIGRID DLS/DLI
2. I/O MODE: INTEGRATING PRO TOOLS HD/HDX AND HD NATIVE SYSTEMS
INTO A SOUNDGRID NETWORK
If you’re comfortable connecting and conguring DigiLink-compatible I/O devices, then it will not be dicult to integrate the DLI/
DLS and SoundGrid network with a Pro Tools HD/HDX or HD Native system. Like any Pro Tools peripheral, DLI/DLS devices are
controlled from the Pro Tools Hardware Setup page, and, depending on conguration, may appear on the Pro Tools I/O Setup page
as up to four 192 Digital I/Os.
Because DLI/DLS oers two completely dierent modes of operation—I/O and SGP—the hardware must be set to the proper mode.
On the rear panel of a DLI/DLS unit are two switches, one for each port. To ensure proper operation, both switches must be set to
“I/O.” Before changing connections or switch position, turn o the DLI/DLS and all connected DigiLink-compatible I/O devices.
Mode indicator - Front Panel
Mode Swiches - Back Panel