User Manual

D i g i g r a m
8
•
The
“License Agreement”
window appears: read it, and click on
Yes
to approve it. Do the same for the
“Read Me First”
window.
•
Choose the destination folder where Setup will install the
application files
(\pcxnp
by default). Please note that driver files are
installed in
\windows\system32\Drivers\Digigram\PCXHR
. Click on
Next
•
Check the “Driver for the HR board” check-box option.
•
Select the program folder where the program icons will be added
(default DIGIGRAM). Click on
Next
.
•
Click on
Next
to start copying the files.
•
Click on Continue
anyway
in the
“Hardware installation”
window
(Windows XP).
•
In the
“Digigram drivers”
window, “
PCX HR Settings
” tab select
the number and the size of buffers required by your applications.
Click on
Ok
.
•
Click on Finish to complete the driver installation.
Removing the driver under Windows 2000 and XP
•
Open the Windows
Control Panel
and double-click on the
Add/Remove Software
icon.
•
Select '
Digigram HR Runtime
…'
, and
Change/Remove
.
•
Select Remove in the
“HR Runtime”
window.
•
Follow the instructions to finish to remove the driver.
HOW TO CHECK THE INSTALLATION
Once the driver and the cards are installed according to the procedure
described in this manual, you can verify that the card is properly installed and
works fine as follows:
•
Go to
<Start> <Programs> <Digigram>
and select
<Digigram Control Center>
.
•
In the
“
Digigram
drivers”
window, select the
General Information
tab. In the
“Modules Information”
window, you can see the HR
Runtime modules that have been installed and their versions.
•
In the
“
Digigram
drivers”
window, select the
Diagnostics
tab.
You should see here the icons of the cards you have installed.