User Manual

Configuration of headphone output parameters
Click on the icon to adjust the settings of the
headphones output.
The central fader allows adjusting the signal level on
the headphones output.
The horizontal cursor, in top of the main fader, allows
adjusting the balance between left and right channels.
The heaphones output receives a mix composed of:
- all the inputs (analog and AES/EBU)
- all the audio played on CANCUN output devices
(playback from software applications).
The level of each signal on the input of the mixer
can be adjusted from the left window, as well as the
panoramic.
ANALOG INPUT section
This section allows adjusting the levels of the signals
on the analog inputs right before the mixer. For each
signal, the central fader controls the signal level, and
the upper horizontal slider controls the panoramic
between left and right output channels.
The signal can be selected in solo , and can be
muted .
ANALOG OUTPUT section
This section allows adjusting the levels of the signals
played on the outputs from a software application. For
each signal, the central fader controls the signal level,
and the upper horizontal slider controls the panoramic
between left and right output channels.
The signal can be selected in solo , and can be
muted .
Click on the icon on the top left of the central
headphones window to access the levels adjustment
for the digital signals of the AES/EBU inputs, from the
section DIGITAL INPUT.
17