User Manual

A confirmation window is displayed. Click on

button “Yes” to confirm the firmware update.

The displayed green bar indicates the firmware

update progress.

When the green progress bar has reached 100%

and the message “The Firmware was successfully

updated” is displayed, click on button “Exit” to quit

the firmware updater application.

You can now use your CANCUN which is running

the new firmware.

Notes:

● If the USB cable is disconnected during the firmware update process, the firmware

updater displays an error message. Re-connect the USB cable, and click again on

button “Start Update”.

● In case the firmware update fails, CANCUN is set back to the firmware version applied in

factory, even if you installed a more recent firmware version.