User Manual

• VX442HR/e 1+2 (Wave) (record and playback)

• VX442HR/e 3+4 (Wave) (record and playback)

• If the ASIO driver (32 bits) has been installed:

• The card is visible from any ASIO application.

The ‘Digigram Hardware Settings’ (‘DHS’)

control panel

Digigram Hardware Settings (DHS) is an application allowing to configure the

hardware resources of Digigram cards for all audio applications using them.

A resource being managed by the DHS application can not be modified by any

other applications. To enable an audio application to modify a Digigram card

resource, this resource must not be managed by the DHS.

Note: As soon as a resource of a card is managed by the DHS, the clock

selection of this card MUST be defined in the DHS.

The DHS allows to:

• Select the clock the card uses

• Select the input source

• Adjust analog and digital gains of inputs and outputs

• Enable Sample Rate Converters of an input

• Select the input monitored on an output

• Set the monitoring gains

• Define the digital output format

For more detailed information on how to use this control panel, please refer to its on-

line help.