User Manual

12
e ‘Diagnostics’
cons of the cards you have installed.
•
of the card.
oop a
d. You can also select
ice (PCM only).
right click on the card icon, and
the PCI
package as
to menu <Start>, <Settings>, <Control panel>,
s are:
yback)
back)
back)
back)
yback)
yback)
yback)
back)
back)
• In the “Digigram drivers” window, select th
tab.
You should see here the i
If the card you have installed is listed:
• Right click on the icon
• Select ‘Diagnostics’, and Play Sine. This plays in l
sine signal on the outputs of the car
Play file to play in loop a file of your cho
If the playback is correct, the card is correctly installed
and works.
• To stop the playback,
select Stop Activities.
• If the card is not displayed:
• Make sure that during the HR Runtime installation the
n selected in the
“Driver for the HR boards” has bee
“Select components” window.
• Make sure that the card is correctly inserted in
slot, and screwed on the PC chassis.
• If necessary, uninstall the HR Runtime
described in this manual, and re-install it.
• If the Wave driver has been installed:
• Go
<Sound and Multimedia>, tab “Audio”, Default device
(Playback device, Recording device). The card’s channels
can be selected. The card can be used with any Wave
application.
Available Wave recording and playback device
• VX1221e (VX1222e) 1+2 (Wave) (record and pla
• VX1221e (VX1222e) 3+4 (Wave) (play
• VX1221e (VX1222e) 5+6 (Wave) (play
• VX1221e (VX1222e) 7+8 (Wave) (play
• VX1221e (VX1222e) 9+10 (Wave) (pla
• VX1221e (VX1222e) 11+12 (Wave) (pla
• VX1221e (VX1222e) 5.1A (Wave) (pla
• VX1221e (VX1222e) 5.1B (Wave) (play
• VX1221e (VX1222e) 5.1+2 (Wave) (play
• VX1221e (VX1222e) 7.1 (Wave) (playback)
• VX1221e (VX1222e) 7.1+2 (Wave) (playback)