User Manual

D i g i g r a m

• In the “Digigram drivers” window, select the ‘Diagnostics’

tab.

You should see here the icons of the cards you have installed.

• If the card you have installed is listed:

• Right click on the icon of the card.

• Select ‘Diagnostics’, and Play Sine. This plays in loop a

sine signal on the outputs of the card. You can also select

Play file to play in loop a file of your choice (PCM only).

If the playback is correct, the card is correctly installed

and works.

• To stop the playback, right click on the card icon, and

select Stop Activities.

• If the card is not displayed:

• Make sure that during the HR Runtime installation the

“Driver for the HR boards” has been selected in the

“Select components” window.

• Make sure that the card is correctly inserted in the PCI

slot, and screwed on the PC chassis.

• If necessary, uninstall the HR Runtime package as

described in this manual, and re-install it.

• If the Wave driver has been installed:

• Go to menu <Start>, <Settings>, <Control panel>,

<Sound and Multimedia>, tab “Audio”, Default device

(Playback device, Recording device). The card’s channels

can be selected. The card can be used with any Wave

application.

Available Wave recording and playback devices are:

• VX1221e (VX1222e) 1+2 (Wave) (record and playback)

• VX1221e (VX1222e) 3+4 (Wave) (playback)

• VX1221e (VX1222e) 5+6 (Wave) (playback)

• VX1221e (VX1222e) 7+8 (Wave) (playback)

• VX1221e (VX1222e) 9+10 (Wave) (playback)

• VX1221e (VX1222e) 11+12 (Wave) (playback)

• VX1221e (VX1222e) 5.1A (Wave) (playback)

• VX1221e (VX1222e) 5.1B (Wave) (playback)

• VX1221e (VX1222e) 5.1+2 (Wave) (playback)

• VX1221e (VX1222e) 7.1 (Wave) (playback)

• VX1221e (VX1222e) 7.1+2 (Wave) (playback)