User Manual

VX881e & VX882e

User Manual

Removing the driver under Windows XP

and Windows Server 2003

• Open the Windows Control Panel and double-click on the

Add/Remove Software icon.

• Select “Digigram HR Runtime …”, and Change/Remove.

• Select Remove in the np Runtime window.

• Follow the instructions to finish to remove the driver.

Removing the driver under Windows Vista,

Windows Server 2008, and Windows 7

• Open the Windows Control Panel and double-click on the

Programs and Features icon.

• Select “Digigram HR Runtime for Vista…”, and Change/Remove.

• Select Remove in the HR Runtime window.

• Follow the instructions to finish removing the driver.

How to check the installation

Once the cards and the driver have been installed according to the procedure

described in this manual, you can verify that the card is properly installed and

works fine as follows:

• Menu <Start> <Settings> <Control panel>, <Sound and

Multimedia>, tab “Audio”, Default device (Playback device,

Recording device). The card’s channels can be selected. The card can

be used with any DirectSound application.

Available WDM recording and playback devices are:

• VX881e (VX882e) 1+2 (WDM) (record and playback)

• VX881e (VX882e) 3+4 (WDM) (record and playback)

• VX881e (VX882e) 5+6 (WDM) (record and playback)

• VX881e (VX882e) 7+8 (WDM) (record and playback)

• VX881e (VX882e) 5.1 (WDM) (record and playback)

• VX881e (VX882e) 7.1 (WDM) (record and playback)

• The card is also visible via the np interface: go to <Start>

<Programs> <Digigram> and select <Digigram Control Center>.

• In the “Digigram drivers” window, select the ‘General

Information’ tab.

In the “Modules Information” window, you can see the HR

Runtime modules that have been installed, and their versions.

• In the “Digigram drivers” window, select the ‘Diagnostics’

tab.

You should see here the icons of the cards you have installed.